Manchester-Sheffield-Wath electric railway
From Wikipedia, the free encyclopedia
The Manchester-Sheffield-Wath electric railway was an early electrification scheme on British railways. The route featured long ascents on both sides of the Pennines with the long Woodhead Tunnel at its central summit close to the Woodhead pass. This also led to the route being called the Woodhead Line.
Contents |
[edit] The Route
See also: Manchester-Glossop Line
The main route ran from Manchester London Road (later Manchester Piccadilly) over the Pennines, through the Woodhead Tunnel to Penistone, where the Wath line split. The main line then proceeded through Sheffield Victoria Station and on to Rotherwood exchange sidings. The Wath line ran from Penistone to Wath Marshalling Yard in the heart of the South Yorkshire coalfields.
Minor electrified branches off the main line ran to the locomotive depot at Reddish, Glossop (for local passenger trains), Dewsnap sidings (all at the Manchester end) and Tinsley Marshalling Yard (at the Sheffield end).
[edit] Electrification
Following developments with electric traction in the USA, the Great Central Railway first considered the electrification of the line prior to World War I. No detailed plans were drawn up, but by the 1920s the high levels of freight traffic made steam operation increasingly problematic.
Detailed planning for the electrification started in the 1930s. Some gantries for the overhead wires were erected and a prototype locomotive was constructed (which was operated in the Netherlands immediately after World War II, acquiring the nickname "Tommy" - which was later used officially).
The depression and war intervened; the electrification of route was not completed until early 1955 (although the official opening was in 1954). The system was electrified at 1,500V DC, similar to the Dutch style of electrification that had also been used on the LNER's pre-war Newport-Shildon line and the post-war London Great Eastern suburban electrification. (This scheme had the advantage that regenerative braking could easily be employed to feed power from a descending train to an ascending train in the same block of line.)
Two classes of locomotive were built at Gorton Works, Manchester, exclusively for the line. These were the EM1 (Class 76) Bo+Bo (the + signifiying that the bogies were articulated) mixed-traffic locomotives and seven larger EM2 (Class 77) Co-Co locomotives for express passenger services.
The Worsborough incline was a formidable feature on the Wath-Penistone section. This line was opened east of Silkstone in 1880 to alleviate congestion at Barnsley. The difficulty in operating this steeply-graded section (which included the two Silkstone tunnels) with steam traction was a key reason for electrification. Coal trains were normally double-headed by two Class 76 locomotives, with two additional Class 76s banking at the rear. This was the only section of railway in the UK to be regularly operated by four locomtives per train. A "Clearcall" intercom system (via the overhead electric wires) was developed to allow the crews of the front and rear locomotives to communicate.
The purpose-built power control centre for the line was adjacent to Penistone station. The building still stands, but has been adapted for alternative commercial use.
In 1965 the scheme was extended to take in the brand new Tinsley Marshalling Yard in Sheffield. The overhead line equipment on this section was designed to be easily convertible to 25kV AC electrification.
[edit] Closure
Electric trans-Pennine passenger services ceased after just 16 years in January 1970, partly due to the cost of providing an electrified link into Sheffield Midland station as Sheffield Victoria was slated for closure, and also ostensibly to free up train paths for freight. A local electric service remained at the Manchester end of the line. The Class 77 express passenger train locomotives were sold to the Netherlands Railways, becoming NS Class 1500.
By 1981 freight traffic had declined to extent that the route was closed; only the Manchester-Glossop/Hadfield local passenger trains were left running. British Rail claimed that the cost of replacing the out-of-date and non-standard equipment on the main section of the line was prohibitive. All but one of the remaining Class 76 locomotives were scrapped. The Wath branch was rapidly lifted between Aldham Junction in Wombwell and West Silkstone Junction. As a part of the closure agreement, the track on the Sheffield-Penistone-Hadfield section of the route was left in place for five years during which time it saw occasional use by diesel-hauled trains a diversion route despite officially being closed. In 1986 this remaining track was lifted, except for the sections in the vicinity of Penistone station (which remained open for Sheffield-Huddersfield trains), and east of Deepcar which remained for both freight and passenger traffic in the Sheffield area.
In December 1984 the remaining equipment at the Manchester end of the line was modified to the by now standard 25kV AC, thus ending the use of 1,500V DC overhead electrification on British Rail. The Class 506 were withdrawn at the same time, being replaced by Class 303 EMUs from the Glasgow area. The line is now operated by Class 323 EMUs.
[edit] Re-opening?
The majority of the route has been converted to public foot, cycle and bridle paths, the only major blockage being the Stocksbridge bypass which crosses the route on an embankment built directly over the railway alignment. Thus the majority of the route is protected for possible reopening. Indeed, in the early 21st century there have been several projects mooted to re-open the route as a trans-Pennine connection between Manchester and Sheffield, one as a non-electrified regional passenger route, and one as an electrified long-haul freight and passenger route; however, none of these has yet got beyond the drawing board.
