Turntable (railroad)
From Wikipedia, the free encyclopedia
Image:Train roundhose 1909.jpg
Image:Kleine Handbetätigte Drehscheibe im Textilmuseum Bocholt.jpg
Image:600 Gordon on turntable.jpg
In rail terminology, a turntable is a device used to turn railroad rolling stock. When steam locomotives were still in wide use, the railroads needed a way to turn the locomotives around for return trips as their controls were not configured for extended periods of running in reverse and in many locomotives the top speed was lower in reverse motion. Turntables were also used to turn observation cars so that their windowed lounge ends could be oriented toward the rear of the train.
The turntable bridge (the part of the turntable that included the tracks and that swiveled to turn the equipment) could span anywhere from 30 to 120 feet, depending on the railroad's needs. Larger turntables were installed in the locomotive maintenance facilities for longer locomotives, while short line and narrow gauge railroads typically used smaller turntables as their equipment was smaller. Turntables as small as 10 feet in diameter have been installed in some industrial facilities where the equipment is small enough to be pushed one at a time by human or horse power.
In engine maintenance facilities, a turntable was usually surrounded, in part or in whole, by a roundhouse. It was more common for the roundhouse to only cover a portion of the land around a turntable but fully circular roundhouses exist, such as these preserved roundhouses:
- the roundhouse that serves as the basis for the Baltimore and Ohio Railroad Museum in Baltimore, MD
- The Roundhouse in London, England, now an arts centre.
Turntables still in use are more common in North America than in Europe, where locomotive design favors configurations with a controller cabin on both ends or in the middle.
In Britain, where steam hauled trains generally have vacuum operated brakes, it was quite common for turntables to be operated by vacuum powered motors worked from the locomotive's vacuum ejector or pump via a flexible hose or pipe although a few manually and electrically operated examples exist. Several working examples remain; many on Heritage railways in Great Britain. Examples include: -
- Churston
- Kidderminster
- Didcot
- Yeovil Junction
- Swanage
- Aviemore
- St Blazey
- Perth
- Scarborough
- Fort William
- Pickering
- Carnforth
- Keighley
- Old Oak Common
- Tyseley
- NRM York
- Barrow Hill
- Wansford
- Hornsey
- Aberdeen
- Neville Hill
[edit] See also
| Wikimedia Commons has media related to: |
- Wye - a way of turning whole trains.
- Transfer table (UK: 'traverser') - provides access to two or more parallel tracks in a space saving manner like a turntable, but without the ability to turn.de:Drehscheibe
