Demosaicing
From Wikipedia, the free encyclopedia
A demosaicing algorithm is a digital image process used to interpolate a complete image from the partial raw data received from the color-filtered image sensor internal to many digital cameras in form of a matrix of colored pixels. Also known as CFA interpolation or color reconstruction, another common spelling is demosaicking.
Many modern digital cameras provide a raw file with data in a filter-mosaic format; the user can demosaic it using software, rather than using the camera's built-in firmware. Mosaicing refers to the process of undoing the in-camera interpolation, recovering the RAW data from a JPEG image, and is usually done by reverse engineering the camera.[citation needed]
Contents |
[edit] Goal
There are a number of different ways the pixels are arranged in practice, the most common being the Bayer filter similar to the image at right, alternating values of Red (R) Green (G) for odd rows and alternating values of Green (G) and Blue (B) for even rows.
Since each raw pixel of the sensor is behind a color filter, the output is a mosaic of monochrome pixels in one of the color components (e.g. red, green, or blue). Thus, an algorithm is needed to estimate for each pixel the color levels for all color components, rather than a single component.
[edit] Tradeoffs
Some methods may produce better results for natural scenes, and some for printed material, for instance. This reflects the inherent problem in estimating pixels that we do not really know for certain.
Naturally there is also the ubiquitous tradeoff of speed versus quality of estimation.
[edit] Illustration
To reconstruct a color image from the data collected by the color filtering array, you need to fill in the blanks. The mathematics here is subject to individual implementation, and is called demosaicing. If you have a RAW image, you can use different demosaicing than what is built into the camera, often yielding higher quality.
In this example, we use Adobe Photoshop's bicubic interpolation to simulate the circuitry of a Bayer filter device such as a digital camera. In a typical commercial implementation, low pass anti-alias filters will be added that make the artifacts shown here less pronounced, with a corresponding reduction of sharpness.
This is the original image, made with Adobe Illustrator. On a perfect digital camera with perfect optical lens that can measure every pixel's exact Red, Green, and Blue components, the resulting image will probably look like this.
This is a simulated sampling taken by a Bayer filtered sensor array. Each pixel only has a value of either R or G or B.
| ||
| Frame enlargement | ||
| 
| 
|
| Red | Green | Blue |
A digital camera has certain circuits to reconstruct the whole image using above information. The resulting image could be something like this:
| 
|
| Frame enlargement of the original. | Frame enlargement of the reconstructed image. |
The reconstructed image is accurate in uniform-colored areas, but has a loss of resolution (detail and sharpness) and has edge artifacts (for example, the edges of letters have visible color fringes and some roughness).
[edit] Algorithms
[edit] Quick (Low-Grade)
- Nearest Neighbor Replication simply copies an adjacent pixel of the correct color component. It is unsuitable for any application where quality matters, but can be useful for continuous previews given limited computational resources.
[edit] Simple interpolation
These are relatively straightforward mathematical operations using only nearby instances of the same color component. The simplest is the bilinear interpolation method. In this method, the red value of a non-red pixel is computed as the average of the adjacent red pixels, and similar for blue and green.
[edit] Synthetic field based interpolation
These are algorithms that first compute an alternate representation, and use that to interpolate the color components.
- Hue interpolation
- Log hue interpolation
[edit] Adaptive
These algorithms adapt their method of estimation (i.e. the estimation formula) depending on features of the area surrounding the pixel of interest.
- Variable Number of Gradients interpolation computes gradients near the pixel of interest and uses the lower gradients (representing smoother and more similar parts of the image) to make an estimate. It is used in first versions of dcraw, and suffers from color artifacts.
- Pixel Grouping uses assumptions about natural scenery in making estimates. It has fewer color artifacts on natural images than the Variable Number of Gradients method.
- Adaptive homogeneity-directed interpolation selects the direction of interpolation so as to maximize a homogeneity metric, thus typically minimizing color artifacts. It has been implemented in recent versions of dcraw.
[edit] Proprietary
Various commercial products implement proprietary estimation methods about which little is publicly known, and which may or may not be similar to publicly known algorithms.
Examples:
- Adobe Photoshop RAW plug-in
[edit] External links
- Comparison of different interpolations, ImagEval Consulting LLC
- A Study of Spatial Color Interpolation Algorithms for Digital Cameras and especially description of Variable Number of Gradients algorithm by Ting Chen, Stanford University
- description of Adaptive homogeneity-directed algorithm -- from the research page of the designer, Keigo Hirakawa
- Paul Lee homepage -- implementor of Adaptive homogeneity-directed algorithm in recent versions of dcraw
- description of Pixel Grouping algorithm, Chuan-kai Lin, Portland State University, 2004
- K. Parulsi and K. Spaulding (2003). Color image processing for digital cameras. In Digital Color Imaging, G. Sharma, ed. Boca Raton, Florida: CRC Press. 727–757.
- HowStuffWorks: How Digital Cameras Work, More on Capturing Color, with a demosaicing algorithm at work animation
- Demosaicing in the Kodak DC210 Digital Camera, Cleve Cheng, Mar 13 1998
- Roger W. Ehrich. Evaluating Algorithms for the Demosaicing of Bayer Arrays. Computer Science Courses. Virginia Tech CS Department.fr:Dématriçage
